Herzog Veneers · Design & Inspiration
Three Veneer Match Examples in PanelWizard®
See how the same Afrormosia veneer looks in three 48-inch layouts. The Book match runs vertically, the Diamond match brings the grain toward the center, and the round Pie match fans out from the center in 18 wedges.
Follow along with bundle AFROMO-3171-086. To try another veneer, open its product page and click the wand icon beside a bundle photo.
1. Book Match: Six Vertical Sections
- Open bundle AFROMO-3171-086 and select Book, the left icon in the second row of the PanelWizard match menu.
- Set Final Width and Final Height to 48. Set Section Width to 8 inches and leave Rotation at 0°.
- Drag the yellow cut box to choose the grain you want, then turn on Show Cut Lines to see the joins. In the screenshot, PanelWizard shows 6 of 24 sheets required.
2. Diamond Match: Diagonal Grain
- Open bundle AFROMO-3171-086 and select Diamond, the right icon in the third row of the PanelWizard match menu.
- Set Final Width/Height to 48 and Section Width to 8 inches. For the layout shown, the preview displays a Section Height of 33.9 inches and a Rotation of 0°.
- Drag the yellow cut box to see how the grain meets at the center of the diamond. Turn on Show Cut Lines to reveal the seams. This layout requires 20 of 24 sheets.
3. Pie Match: 18 Wedges
- Open bundle AFROMO-3171-086 and select Pie, the right icon in the fifth row of the PanelWizard match menu.
- Choose Round, set Sections to 18, and set Height/Width to 48 for a 48-inch diameter panel.
- Drag the yellow wedge on the veneer image to choose the grain. Turn on Show Cut Lines to see where the wedges meet. The preview shows 18 of 24 sheets required.
Explore more match styles
Choose a pattern icon to see how a different match changes the same veneer. Drag the yellow cut box to try a different area of grain. Adjust Rotation when available to change the grain angle, or move the Zoom slider for a closer look at the seams.
Watch Sheets required below the preview as you adjust the layout. If the bundle has too few sheets for your design, try a smaller panel, a different match, or another bundle.
Email your panel or request a quote
When the preview looks right, click Click Here to Email Panel. Review the dimensions, enter your email address, and click Send for a copy. For pricing, select I would like a quote and complete the contact and project fields before sending.